󰊼
Free Android app. Works offline, no pop-up ads, no subscription.
Get it on Google Play

What gauge wire for a 1,500 watt amp?

A 1,500 W RMS class D amp draws about 136 A at full power. Fuse it at 150 A at the battery and run 2 AWG copper power and ground (or 1/0 AWG if the wire is CCA) for a 16 ft run.
A class A/B amp of 1,500 W draws more, about 217 A, and takes a 225 A fuse.

Power and ground wire gauge for a 1,500 W amp

Power and ground wire gauge for a 1,500 W amp
Power runClass D copperClass D CCAA/B copperA/B CCA
5 ft211/03/0
10 ft211/03/0
15 ft211/03/0
20 ft21/01/03/0
25 ft12/02/04/0

Current draw and fuse for a 1,500 W amp

Current draw and fuse for a 1,500 W amp
Amp classCurrent draw at full powerFuse at the battery
Class D136 A150 A
Class A/B217 A225 A

Good to know

Use the same gauge for the ground, as short as you can, to bare metal on the body or frame.
Several amps on one run: add their RMS watts. With a distribution block, each amp’s own lead can be thinner, with its own fuse.
Method: current at full power = RMS ÷ efficiency (class D 80 %, A/B 50 %) ÷ 13.8 V; the next standard fuse; the thinnest wire rated for that fuse (33 CFR 183.425 Table 5, 105 °C, × 0.85 for the engine bay; CCA × 0.79) with at most 0.5 V drop over the power run plus 3 ft of ground.
Guidance only, never a safety rating. Follow your amp and vehicle manuals. The fuse protects the wire: put it within 18 in of the battery. Disconnect the battery before you wire.

Frequently asked questions

What gauge wire do I need for a 1,500 watt amp?

A 1,500 W RMS class D amp draws about 136 A at full power. Fuse it at 150 A at the battery and run 2 AWG copper power and ground (or 1/0 AWG if the wire is CCA) for a 16 ft run.

What size fuse for a 1,500 watt amp?

About 150 A for class D, the next standard size above its full-power draw of 136 A, and never bigger than the wire is rated for.

Will my alternator keep up with a 1,500 watt amp?

At full power the amp alone draws about 136 A (class D), on top of the 40–60 A the vehicle uses. Music averages less; check yours with the current draw calculator.