Ported box size for 2 10" subs
2 10" subs usually want 2–3.2 ft³ net (57–91 L) in a ported box. Your sub’s manual wins: if it gives a volume, build to that.
Example: 2.6 ft³ (73.6 L) net in 3/4" MDF is a box 32 3/4" × 13" × 18" outside (width × height × depth), with a 3 3/16" × 11 1/2" slot port 31 7/8" long for 32 Hz. The port takes 0.83 ft³ (23.5 L), already counted in that size.
The 31 7/8" port is longer than the box is deep inside (16 1/2"): fold it into an L along the side or the back.
Example box for 2.6 ft³ (73.6 L) net
Example box for 2.6 ft³ (73.6 L) net| What | Size |
|---|
| Outside (W × H × D) | 32 3/4" × 13" × 18" (832 × 330 × 457 mm) |
|---|
| Inside (W × H × D) | 31 1/4" × 11 1/2" × 16 1/2" |
|---|
| Gross volume | 3.43 ft³ (97.1 L) |
|---|
| Slot port | 3 3/16" wide × 11 1/2" tall (36.4 sq in) |
|---|
| Port length | 31 7/8" (809 mm) for 32 Hz |
|---|
| Port takes up | 0.83 ft³ (23.5 L) |
|---|
| Net volume | 2.6 ft³ (73.6 L) |
|---|
Cut sheet for the example box (3/4" MDF)
Cut sheet for the example box (3/4" MDF)| Piece | Qty | Size |
|---|
| Front (baffle) | 1 | 32 3/4" × 13" |
|---|
| Back | 1 | 32 3/4" × 13" |
|---|
| Top and bottom | 2 | 32 3/4" × 16 1/2" |
|---|
| Sides | 2 | 11 1/2" × 16 1/2" |
|---|
Same slot port at other tunings
Same slot port at other tunings| Tuning | Slot length |
|---|
| 30 Hz | 36 15/16" (938 mm) |
|---|
| 32 Hz | 31 7/8" (809 mm) |
|---|
| 34 Hz | 27 11/16" (703 mm) |
|---|
| 36 Hz | 24 1/8" (613 mm) |
|---|
Typical net volume for 10" subs
Typical net volume for 10" subs| Subs | Sealed | Ported |
|---|
| 1 | 0.6–1 ft³ | 1–1.6 ft³ |
|---|
| 2 | 1.2–2 ft³ | 2–3.2 ft³ |
|---|
| 3 | 1.8–3 ft³ | 3–4.8 ft³ |
|---|
| 4 | 2.4–4 ft³ | 4–6.4 ft³ |
|---|
Before you cut
Take off the sub’s own displacement (in its manual, often 0.05 to 0.2 ft³ per sub) and any bracing: the box calculator does that and redoes the width.
Measure the space twice, including the angle of the seat back in a truck cab. A wedge box often fits where a rectangle doesn’t.
Volume ranges are common starting points for car subs, not a standard. The example uses the middle of the range, 3/4" MDF, and for ported boxes a slot port of 14 sq in per ft³ tuned to 32 Hz along the full inside height.
Other box sizes for 10" subs
Frequently asked questions
What size ported box for 2 10" subs?
2 10" subs usually want 2–3.2 ft³ net (57–91 L) in a ported box. Your sub’s manual wins: if it gives a volume, build to that.
What are the dimensions of a ported box for 2 10" subs?
Example: 2.6 ft³ (73.6 L) net in 3/4" MDF is a box 32 3/4" × 13" × 18" outside (width × height × depth), with a 3 3/16" × 11 1/2" slot port 31 7/8" long for 32 Hz. The port takes 0.83 ft³ (23.5 L), already counted in that size.
What should a ported box for 2 10" subs be tuned to?
Most daily boxes are tuned between 30 and 36 Hz. Lower goes deeper and needs a longer port; higher hits harder up top. Your sub’s manual may suggest a tuning.