Sealed box size for 2 12" subs
2 12" subs usually want 2–3.2 ft³ net (57–91 L) in a sealed box. Your sub’s manual wins: if it gives a volume, build to that.
Example: 2.6 ft³ (73.6 L) net in 3/4" MDF is a box 24 7/16" × 15" × 16" outside (width × height × depth).
Example box for 2.6 ft³ (73.6 L) net
Example box for 2.6 ft³ (73.6 L) net| What | Size |
|---|
| Outside (W × H × D) | 24 7/16" × 15" × 16" (621 × 381 × 406 mm) |
|---|
| Inside (W × H × D) | 22 15/16" × 13 1/2" × 14 1/2" |
|---|
| Gross volume | 2.6 ft³ (73.6 L) |
|---|
| Net volume | 2.6 ft³ (73.6 L) |
|---|
Cut sheet for the example box (3/4" MDF)
Cut sheet for the example box (3/4" MDF)| Piece | Qty | Size |
|---|
| Front (baffle) | 1 | 24 7/16" × 15" |
|---|
| Back | 1 | 24 7/16" × 15" |
|---|
| Top and bottom | 2 | 24 7/16" × 14 1/2" |
|---|
| Sides | 2 | 13 1/2" × 14 1/2" |
|---|
Typical net volume for 12" subs
Typical net volume for 12" subs| Subs | Sealed | Ported |
|---|
| 1 | 1–1.6 ft³ | 1.75–2.75 ft³ |
|---|
| 2 | 2–3.2 ft³ | 3.5–5.5 ft³ |
|---|
| 3 | 3–4.8 ft³ | 5.25–8.25 ft³ |
|---|
| 4 | 4–6.4 ft³ | 7–11 ft³ |
|---|
Before you cut
Take off the sub’s own displacement (in its manual, often 0.05 to 0.2 ft³ per sub) and any bracing: the box calculator does that and redoes the width.
Measure the space twice, including the angle of the seat back in a truck cab. A wedge box often fits where a rectangle doesn’t.
Volume ranges are common starting points for car subs, not a standard. The example uses the middle of the range, 3/4" MDF, and for ported boxes a slot port of 14 sq in per ft³ tuned to 32 Hz along the full inside height.
Other box sizes for 12" subs
Frequently asked questions
What size sealed box for 2 12" subs?
2 12" subs usually want 2–3.2 ft³ net (57–91 L) in a sealed box. Your sub’s manual wins: if it gives a volume, build to that.
What are the dimensions of a sealed box for 2 12" subs?
Example: 2.6 ft³ (73.6 L) net in 3/4" MDF is a box 24 7/16" × 15" × 16" outside (width × height × depth).
Should a 12" sub go sealed or ported?
Sealed is smaller and tighter. Ported is louder for the same power and goes deeper, but the box is bigger and needs a port.