Sealed box size for a 8" sub
A 8" sub usually want 0.35–0.6 ft³ net (10–17 L) in a sealed box. Your sub’s manual wins: if it gives a volume, build to that.
Example: 0.47 ft³ (13.5 L) net in 3/4" MDF is a box 9 3/4" × 11" × 12" outside (width × height × depth).
Example box for 0.47 ft³ (13.5 L) net
Example box for 0.47 ft³ (13.5 L) net| What | Size |
|---|
| Outside (W × H × D) | 9 3/4" × 11" × 12" (247 × 279 × 305 mm) |
|---|
| Inside (W × H × D) | 8 1/4" × 9 1/2" × 10 1/2" |
|---|
| Gross volume | 0.47 ft³ (13.5 L) |
|---|
| Net volume | 0.47 ft³ (13.5 L) |
|---|
Cut sheet for the example box (3/4" MDF)
Cut sheet for the example box (3/4" MDF)| Piece | Qty | Size |
|---|
| Front (baffle) | 1 | 9 3/4" × 11" |
|---|
| Back | 1 | 9 3/4" × 11" |
|---|
| Top and bottom | 2 | 9 3/4" × 10 1/2" |
|---|
| Sides | 2 | 9 1/2" × 10 1/2" |
|---|
Typical net volume for 8" subs
Typical net volume for 8" subs| Subs | Sealed | Ported |
|---|
| 1 | 0.35–0.6 ft³ | 0.6–1 ft³ |
|---|
| 2 | 0.7–1.2 ft³ | 1.2–2 ft³ |
|---|
| 3 | 1.05–1.8 ft³ | 1.8–3 ft³ |
|---|
| 4 | 1.4–2.4 ft³ | 2.4–4 ft³ |
|---|
Before you cut
Take off the sub’s own displacement (in its manual, often 0.05 to 0.2 ft³ per sub) and any bracing: the box calculator does that and redoes the width.
Measure the space twice, including the angle of the seat back in a truck cab. A wedge box often fits where a rectangle doesn’t.
Volume ranges are common starting points for car subs, not a standard. The example uses the middle of the range, 3/4" MDF, and for ported boxes a slot port of 14 sq in per ft³ tuned to 32 Hz along the full inside height.
Other box sizes for 8" subs
Frequently asked questions
What size sealed box for a 8" sub?
A 8" sub usually want 0.35–0.6 ft³ net (10–17 L) in a sealed box. Your sub’s manual wins: if it gives a volume, build to that.
What are the dimensions of a sealed box for a 8" sub?
Example: 0.47 ft³ (13.5 L) net in 3/4" MDF is a box 9 3/4" × 11" × 12" outside (width × height × depth).
Should a 8" sub go sealed or ported?
Sealed is smaller and tighter. Ported is louder for the same power and goes deeper, but the box is bigger and needs a port.